ASUS mypal a600 User Manual
Avolites Pearl 2000 Operators Manual - page
59
P2000MAN.DOC 19/10/99 17:59
If you wish you may now alter the MEMORY MODE or the FADE TIMES.
(See Section 6.3 Using the TIMES menu.)
(See Section 6.3 Using the TIMES menu.)
You can also use Preset Focuses to edit memories. This is described in
Chapter 8 Preset Focuses.
Chapter 8 Preset Focuses.
6.8 Copying a Memory
The word COPY means two things when COPYING a Memory (or Chase).
It means that the original Memory is replicated, but it also means that all the
replicas and the original are linked, and changing ANY of the linked
Memories changes ALL of them. Deleting a Copy does not affect the other
replicas.
replicas and the original are linked, and changing ANY of the linked
Memories changes ALL of them. Deleting a Copy does not affect the other
replicas.
To Copy a Memory :
•
Press and hold down the grey ADD button of the Memory you wish to
Copy.
You are asked to press a Playback SWOP button
.
•
Press the SWOP button of the Playback Channel you wish the Copy to
occupy.
You can change Roller Pages or Facets if you need to while the ADD button is
still held down
.
Linked Copies can be replayed and edited like any other Memory, but any
changes will affect ALL the Linked Memories.
changes will affect ALL the Linked Memories.
6.9 Photocopying a Memory
If you want to duplicate a Memory (or Chase), but don’t want it Linked to any
other Memory, use Photocopy.
other Memory, use Photocopy.
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE menu.
•
Press the blue PHOTOCOPY button on the Program Select bank.
Its LED
will light up
.
•
Press and hold down the grey ADD button of the Memory you wish to
Photocopy.
You are asked to press a Playback SWOP button
.
•
Press the SWOP button of the Playback Channel you wish the
Photocopy to occupy.
You can change Roller Pages or Facets if you need to while
the ADD button is still held down
.
6.10 Deleting a Memory
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE menu.
•
Press the blue DELETE button on the Program Select bank.
Its LED will
light up
.
•
Press the Playback SWOP button TWICE of the Memory you want to
delete.
The DELETE LED will go out, and so will the LED on the Playback Channel you
just deleted, indicating that it is now empty
.
6.11 Viewing a Memory
To see the output of a Memory in Program or Run mode :
•
Press the VIEW button.