ASUS mypal a600 User Manual
Avolites Pearl 2000 Operators Manual - page
98
P2000MAN.DOC 19/10/99 17:59
•
Press the CHANNEL button again to exit the Channel menu.
9.6.6.1 To adjust a current intensity value by plus or minus 5% :
•
Turn the Key to Program.
•
Select your Fixtures by whatever means you wish.
•
Press the CHANNEL button.
Puts you in the Channel Select Menu.
•
Press Softbutton G [AT%].
Screen asks you to enter an intensity value.
•
Press Softbutton E [+5%] or Softbutton F [-5%] to adjust the intensities
of Selected Fixtures.
•
Press the CHANNEL button again to exit the Channel menu.
9.7 The INCLUDE button
As discussed in Section 4.3, How HTP and LTP Channels are recorded LTP
Channels output from the Playback area will not record in a new Memory (or
Chase Step) because they are not in the Programmer.
Channels output from the Playback area will not record in a new Memory (or
Chase Step) because they are not in the Programmer.
To put all the Channels from a Memory or Chase Step into the Programmer
to record elsewhere, you can use INCLUDE.
to record elsewhere, you can use INCLUDE.
The functionality of this button has been enhanced, so that you can now use
it at any time to add either the DMX values of whole Memories of Chase
Steps into the Programmer, or just parts of them. The button has also moved
to the grey buttons over the keypad.
it at any time to add either the DMX values of whole Memories of Chase
Steps into the Programmer, or just parts of them. The button has also moved
to the grey buttons over the keypad.
You can now INCLUDE a Chase step from an UNFOLDED Chase.
A shape in a Memory will automatically be INCLUDED.
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE menu.
•
If you want to Include a particular Chase Step, run the Chase and Stop it
on the step you want to Include.
Otherwise if its Playback Fader is down, or the Playback Fader is up and the Chase
is running, you will Include the last complete step of the Chase that was run.
is running, you will Include the last complete step of the Chase that was run.
•
Ensure that you have nothing Selected.
•
Press the grey INCLUDE button.
•
Press the SWOP button of the Playback Fader of the Memory or Chase
Step you wish to recall.
The Memory or Chase Step is output from the desk, and
loaded into the Programmer.
You can Include more than one Memory or Chase Step by repeating this step as
many times as you wish.
many times as you wish.
•
Make any other changes to the look onstage you require, before storing
as a Memory or part of a Chase as normal.
9.7.1 Using INCLUDE to selectively recall Fixtures or Attributes
You can also use the INCLUDE function to recall chosen Attributes into
Selected Fixtures from a Memory or Chase Step.
Selected Fixtures from a Memory or Chase Step.
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE menu.
•
If you want to Include Attributes from a particular Chase Step, run the
Chase and Stop it on the step you want to Include.