Audiovox 128-6586 User Manual
SETUP
(Continued)
Connecting The Radio Antenna
FM: Connect the FM antenna (included) to the FM ANTENNA terminals. Fully unwind the wire antenna. Then
extend the wire antenna and place it in the position that sounds best.
AM: Connect the loop antenna (included) to the AM LOOP ANTENNA jack. Rotate the antenna to get the best
receiving position.
AV1 (SAT/VCR)
Connect the audio and video output jacks of the AV equipment (VCR, Satellite receiver, etc.) to the audio and
video input jacks on the unit with an Audio/Video cable (included).
If the AV equipment has bitstream/PCM coxial audio out jack, Connect the equipment to the unit by using a
coaxial cable.
Connect the audio and video output jacks of the AV equipment (VCR, Satellite receiver, etc.) to the audio and
video input jacks on the unit with an Audio/Video cable (included).
If the AV equipment has bitstream/PCM coxial audio out jack, Connect the equipment to the unit by using a
coaxial cable.
AV2 (DVD)
Connect the audio and video output jacks of the DVD player to the audio and video input jacks on the unit with
an Audio/Video cable (included).
Connect the coxial digital audio output jack of the DVD player to the DIGITAL AUDIO IN on the unit by using
a coaxial cable.
Connect the audio and video output jacks of the DVD player to the audio and video input jacks on the unit with
an Audio/Video cable (included).
Connect the coxial digital audio output jack of the DVD player to the DIGITAL AUDIO IN on the unit by using
a coaxial cable.
Video & Audio Input/Output Setting
6
TV
The unit can be connected to your TV by connecting the audio and video ouput jacks of the unit to the audio
and video input jacks on your TV.
To record the playing signal, connect AUDIO OUT to the recordable equipment (Recordable cassette player,
Recordable MD player, etc.).
The unit can be connected to your TV by connecting the audio and video ouput jacks of the unit to the audio
and video input jacks on your TV.
To record the playing signal, connect AUDIO OUT to the recordable equipment (Recordable cassette player,
Recordable MD player, etc.).
Watching a DVD
1. Connect the unit to the TV and the DVD player.
2. Turn on the unit and press the FUNCTION button on the remote control to select AV2 auto-detected mode,
1. Connect the unit to the TV and the DVD player.
2. Turn on the unit and press the FUNCTION button on the remote control to select AV2 auto-detected mode,
or press the AV2 button on the front panel directly, If no sound in digital input mode, press the AV2 button
of the front panel to AV2 ANALOG mode. Force analog mode is activated by pressing the front panel AV2
button only.
of the front panel to AV2 ANALOG mode. Force analog mode is activated by pressing the front panel AV2
button only.
3. Turn on your TV and follow the instructions included with it to select the corresponding VIDEO input that
you connected to the unit.
4. Turn on your DVD player to start playing.