Axis 26031r3 User Manual

Image 

Focus

Zoom puller

Tilt

screw

adjustment

Tilt

screw

adjustment

puller

balance 
ring

Locking screw

1. Open the Live View page in the Web interface and make the following adjustments on 

the camera:

2. Loosen the locking screw and tilt adjustment screws.
3. Turn the lens to the desired position.
4. Once satisfied, gently tighten the locking screw and tilt adjustment screws to secure the 

camera’s position.

5. Turn the image balance ring to set the horizontal position.
6. Open the Focus Adjustment page in the Web interface under Basic Configuration > 

Focus and follow the on-screen instructions. Use the image window to adjust the focus 

and zoom.
• To set the focus and zoom, loosen the zoom and focus pullers counterclockwise and 

rotate the rings.

• Lock the focus and zoom pullers in position by rotating the screws clockwise.