Axis 26031r3 User Manual

Depending on whether or not the Live View page has been customized, the buttons 

described below may or may not be visible.

The Video Format drop-down list allows the video format on the Live 

View page to be temporarily changed. 

The Output buttons control the 

output directly from the Live 

View page. These buttons are 

configured under Setup > Live 

View Config > Layout.

Pulse - click this button to activate the 

output for a defined period of time, e.g. 

to switch on a light for 20 seconds.

Active/Inactive - click these buttons to 

manually start and stop a connected 

device, e.g. switch a light on/off.

The Action buttons can trigger an event directly from the Live View page. 

These are configured under Setup > Live View Config > Layout.

The Snapshot button saves a snapshot of the video image currently being 

displayed. Right-click on the video image to save it in JPEG format on your 

computer. This button is primarily intended for use when the AMC viewer 

toolbar is not available.

The AMC viewer toolbar (AXIS Media Control) is available in Microsoft Internet 

Explorer only. It displays the following buttons:

The Play/Stop button starts and stops the live video stream.

The Snapshot button saves a snapshot of the video image currently being 

displayed. The Snapshot function and the target directory for saving snapshots 

can be configured from the AMC Control Applet in the Windows Control Panel 

(Internet Explorer only).

Click the View Full Screen button to make the video image fill the entire 

screen area. No other windows will be visible. Press Esc (Escape) on the 

computer keyboard to exit full screen.
Click the Record button to start an MPEG-4 recording (only available when 

viewing MPEG-4).