Axis 27756r1 User Manual

After installing the software, it must be configured for your cameras and video servers. Among other things this 

chapter describes how to configure and maintain AXIS Camera Station as well as how to set up recording, 

motion detection, and alarms. For installation instructions refer to AXIS Camera Station Installation Guide.

The first time AXIS Camera Station is started, a search 

function automatically finds and adds cameras/video 

servers that are on your network to AXIS Camera 

Station. If there are more cameras on your network 

than you have a license for, an Install Cameras dialog 

opens automatically.  Simply check the boxes of the 

camera/video servers you would like to add in AXIS 

Camera Station

.  

If a camera/video server is accessed through a proxy server you 
must change the service logon account from” System”. See 
Problems with remote disks or proxy servers., on page 32.

1.From AXIS Camera Station, select Options > 

Camera settings from the menu and click on the Add 

button. 

2. The camera’s details can be entered manually or click 

on the Search button to get a list of available 

cameras/video servers. 

3. A Search List window opens with a list of the 

cameras found on your local subnet and all the devices 

with routers that support multicast traffic. Double-click on 

the desired camera/video server or click on the camera and 

the OK button. 

Search function supports AXIS 2XX video products with firmware version of 
4.03/4.10 or higher except AXIS 205/230/250S.