Axis 27756r1 用户手册
AXIS Camera Station - How to...
9
How to...
After installing the software, it must be configured for your cameras and video servers. Among other things this
chapter describes how to configure and maintain AXIS Camera Station as well as how to set up recording,
motion detection, and alarms. For installation instructions refer to AXIS Camera Station Installation Guide.
Add cameras/video servers
The first time AXIS Camera Station is started, a search
function automatically finds and adds cameras/video
servers that are on your network to AXIS Camera
Station. If there are more cameras on your network
than you have a license for, an Install Cameras dialog
opens automatically. Simply check the boxes of the
camera/video servers you would like to add in AXIS
Camera Station
.
Note:
If a camera/video server is accessed through a proxy server you
must change the service logon account from” System”. See
Problems with remote disks or proxy servers., on page 32.
must change the service logon account from” System”. See
Problems with remote disks or proxy servers., on page 32.
Add a camera/video server - using search
1.From AXIS Camera Station, select Options >
Camera settings from the menu and click on the Add
button.
2. The camera’s details can be entered manually or click
on the Search button to get a list of available
cameras/video servers.
3. A Search List window opens with a list of the
cameras found on your local subnet and all the devices
with routers that support multicast traffic. Double-click on
the desired camera/video server or click on the camera and
the OK button.
Search function supports AXIS 2XX video products with firmware version of
4.03/4.10 or higher except AXIS 205/230/250S.
4.03/4.10 or higher except AXIS 205/230/250S.