Akai mpc2000 User Manual

Page 125

Chapter 8: Creating and Editing Sounds

Select the End: field and press the OPEN WINDOW key to open the
End fine window.

Here it is possible to finely adjust the end point.

• End:

Set the end point.  Change the value with the DATA wheel. It is
possible to change the value to an extremely large number by select-
ing the digit with the DIGIT wheel.  It is also possible to directly
enter a number with the numeric pad and confirm it by pressing the
ENTER key.

• Lngth=

The length of the sample (from the start point to the end point) is
displayed.  You cannot change the value of this field.

• Smpl lngth:

This sets a fixed point from the end point to the start point or from
the end point for the length of the sample.

VARI

When the end point is changed, the start point re-
mains fixed and the length of the sample changes.

FIX

When the end point is changed, the length of the
sample remains fixed and the start point moves.

It is possible to enlarge or reduce the sample wave display by pressing
ZOOM+[F3] or ZOOM-[F2].  Press ZOOM-[F2] to display the entire
wave and set a rough start point then press ZOOM+[F3] several times
to make fine adjustments.

When PLAY X[F6] is pressed, it is possible to play back the currently
selected sound in full velocity according to the settings in the PLAY
X: field.  For details refer to “TRIM Mode.”