Akai mpc2000 User Manual

Page 127

Chapter 8: Creating and Editing Sounds

Select the To: field in LOOP mode or the Lngth: field and press
the OPEN WINDOW key to open the Loop fine window.

Here you can finely adjust the loop point.

• To:

This sets the point where the loop folds.  Change the value with the
DATA wheel. It is possible to change the value to an extremely large
number by selecting the digit with the DIGIT wheel.  It is also pos-
sible to directly enter a number with the numeric pad and confirm it
by pressing the ENTER key.

• Lngth:

This sets the length of the loop.  Change the value with the DATA
wheel. It is possible to change the value to an extremely large num-
ber by selecting the digit with the DIGIT wheel.  It is also possible to
directly enter a number with the numeric pad and confirm it by
pressing the ENTER key.

• Loop lngth:

This fixes the point (To point) where the loop folds at the end point
or to the length of the loop.

VARI

When the point where the loop folds is changed, the
end point remains fixed and the length of the loop
changes.

FIX

When the point where the loop folds is changed, the
length of the loop remains fixed and the end point
moves.

It is possible to enlarge or reduce the sample wave display by pressing
ZOOM+[F3] or ZOOM-[F2].  Press ZOOM-[F2] to display the entire
wave and set a rough point where the loop folds then press ZOOM+
[F3] several times to make fine adjustments.

When PLAY X[F6] is pressed, it is possible to play back the currently
selected sound in full velocity according to the settings in the PLAY
X: field.  For details refer to “TRIM Mode.”