Akai mpc2000 User Manual

Page 131

Chapter 8: Creating and Editing Sounds

Select the End: field in znEDIT mode and press the OPEN WIN-
DOW key to open the Zone end fine window.

Here it is possible to finely adjust the end point.

• End:

Set the end point.  Change the value with the DATA wheel. It is
possible to change the value to an extremely large number by select-
ing the digit with the DIGIT wheel.  It is also possible to directly
enter a number with the numeric pad and confirm it by pressing the
ENTER key.

• Lngth=

The length of the zone (from the start point to the end point) is dis-
played.  You cannot change the value of this field.

• Zone lngth:

This sets a fixed point from the end point to the start point or from
the end point for the length of the zone.

VARI

When the end point is changed, the start point re-
mains fixed and the length of the zone changes.

FIX

When the end point is changed, the length of the zone
remains fixed and the start point moves.

It is possible to enlarge or reduce the sample wave display by pressing
ZOOM+[F3] or ZOOM-[F2].  Press ZOOM-[F2] to display the entire
wave and set a rough start point then press ZOOM+[F3] several times
to make fine adjustments.

When PLAY X[F6] is pressed, it is possible to play back the currently
selected sound in full velocity according to the settings in the PLAY
X: field.  For details refer to “znEDIT Mode.”