Akai mpc2000 User Manual
Page 132
Chapter 8: Creating and Editing Sounds
Setting the Sound Parameters
Set the sound parameters such as the volume or pitch of the sound. It
is also possible to set the BEAT LOOP FUNCTION.
is also possible to set the BEAT LOOP FUNCTION.
Press TRIM (or 5 on the numeric pad) while holding SHIFT and dis-
play the sound parameter screen by pressing PARAMS[F4].
play the sound parameter screen by pressing PARAMS[F4].
• Snd:
Use the DATA wheel to select the sound of which the parameters
you want to set.
you want to set.
• Level:
Sets the volume of the sound. Set the value with the DATA wheel or
use the numeric pad to directly enter the number and confirm it by
pressing the ENTER key.
use the numeric pad to directly enter the number and confirm it by
pressing the ENTER key.
• Tune:
Sets the pitch of the sound. Changes made here will also change the
length of the sound.
length of the sound.
When PLAY X[F6] is pressed, it is possible to play back the currently
selected sound in full velocity according to the settings in the PLAY
X: field. For details refer to “znEDIT Mode.”
selected sound in full velocity according to the settings in the PLAY
X: field. For details refer to “znEDIT Mode.”