Akai mpc2000 User Manual
Page 154
Chapter 10: MIDI/SYNC Mode, OTHER Mode
MIDI/SYNC Mode
The MPC2000 complies to MIDI CLOCKÅAMIDI TIME CODE
ÅAMIDI MACHINE CONTROL synchronous messages. This enables
you to synchronize with other sequencers and also by using a MIDI
MACHINE CONTROL compliant MTR (Multi Track Recorder) con-
trol the MTR from the MPC2000.
ÅAMIDI MACHINE CONTROL synchronous messages. This enables
you to synchronize with other sequencers and also by using a MIDI
MACHINE CONTROL compliant MTR (Multi Track Recorder) con-
trol the MTR from the MPC2000.
If you are only using the MPC2000 or connecting it to a MIDI sound
source and using another sequencer or MTR, it is not necessary to set
the channel.
source and using another sequencer or MTR, it is not necessary to set
the channel.
Synchronizing the MPC2000 with Other Sequencers
To set another sequencer as a master and synchronize the MPC2000
to it, connect the MIDI OUT of the sequencer and the MIDI IN of the
MPC2000.
to it, connect the MIDI OUT of the sequencer and the MIDI IN of the
MPC2000.
MIDI OUT
MIDI IN
F 1
F 2
F 3
F 4
F 5
F 6
MIN
MAX
MIN
MIXER
MAX
OTHER
F 6
F 5
F 4
F 3
F 2
F 1
MIDI/SYNC
SAMPLE
TRIM
PROGRAM
SONG
ASSIGN
PUNCH
DISK
EVENT
START
END
DRUMS
MIDI PRODUCTION CENTER
Press MIDI/SYNC (9 on the numeric pad) while holding down the
SHIFT key to display the MIDI/SYNC mode screen.
SHIFT key to display the MIDI/SYNC mode screen.
To set the MPC2000 as the slave device and receive MIDI synchro-
nous signals, set the Sync In window on the left.
nous signals, set the Sync In window on the left.
In the In: field, select the MIDI Input which you will be receiving
sync-in data.
In the Mode: field, select the type of synchronous signal you will be
using: the MIDI CLOCK or MIDI TIME CODE.
sync-in data.
In the Mode: field, select the type of synchronous signal you will be
using: the MIDI CLOCK or MIDI TIME CODE.
Sequencer
MPC2000
Master
Slave