Akai mpc2000 User Manual
Page 156
Chapter 10: MIDI/SYNC Mode, OTHER Mode
Synchronizing Another Sequencer or MTR to the MPC2000
To set the MPC2000 as a master and synchronize another sequencer
to it, connect the MIDI OUT of the sequencer and the MIDI IN of the
MPC2000.
to it, connect the MIDI OUT of the sequencer and the MIDI IN of the
MPC2000.
MIDI OUT
MIDI IN
MIDI IN
F 1
F 2
F 3
F 4
F 5
F 6
MIN
MAX
MIN
MIXER
MAX
OTHER
F 6
F 5
F 4
F 3
F 2
F 1
MIDI/SYNC
SAMPLE
TRIM
PROGRAM
SONG
ASSIGN
PUNCH
DISK
EVENT
START
END
DRUMS
MIDI PRODUCTION CENTER
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:It is necessary to use an MTR (Multi Track Re-
corder) compliant to MIDI MACHINE CONTROL
in order to synchronize it with the MPC2000.
in order to synchronize it with the MPC2000.
Press MIDI/SYNC (9 on the numeric pad) while holding the SHIFT
key to display the MIDI/SYNC mode screen.
key to display the MIDI/SYNC mode screen.
To set the MPC2000 as a master and sent synchronous signals to the
MIDI, set the Sync Out window on the right.
MIDI, set the Sync Out window on the right.
First, in the Out: field, select the MIDI Output channel to which you
will output the synchronization data.
In the Mode: field, select the type of synchronous signal you will be
using the MIDI CLOCK or MIDI TIME CODE.
will output the synchronization data.
In the Mode: field, select the type of synchronous signal you will be
using the MIDI CLOCK or MIDI TIME CODE.
MPC2000
Sequencer
Master
Slave
MTR (Multi Track Recorder) compliant
to MIDI MACHINE CONTROL
to MIDI MACHINE CONTROL