3com 3CRWE825075A User Manual

51

While you are configuring the 
access point, the Configuration 
Management System stops 
responding.

To maintain wireless association, the service area and the 
security settings on the client and the access point must 
match exactly. Therefore, if you are associated with the 
access point that you are configuring and you change the 
access point service area or security, make sure to change the 
client service area to match.
If you change the IP address and save the change, you cannot 
continue to configure the access point using the old IP 
address. Therefore, if you want to continue configuring this 
access point after you save this change, you must do the 
following:
1 Close your browser.
2 Return to the 3Com Device Manager Wireless Network 

Tree and click Refresh.

3 Select the access point and click Configure to start a new 

configuration session.

The access point cannot be 
configured using the Web 
browser.

Reset the access point (push the reset button located near the 
access point LEDs).