3com corebuilder 7000hd User Manual
32MB Memory Upgrade Steps
2-5
Only use the special key provided if you have difficulty in removing
the switch module.
the switch module.
Place the switch module on a grounded surface or antistatic bag
with all components facing up.
Step 2
Removing the 16MB Memory SIMM
The memory SIMM is located on the lower left corner of the module
when the front panel is facing you. (Figure 2-5) On the top of the
memory SIMM there are two metal spring clips (one on each side of
the SIMM) that hold the SIMM in place (Figure 2-6).
memory SIMM there are two metal spring clips (one on each side of
the SIMM) that hold the SIMM in place (Figure 2-6).
Position of 16MB SIMM in CoreBuilder 7000HD Switch Module -
Front View
Front View
16MB Memory SIMM
Front Panel