3com WX2200 3CRWX220095A User Manual

C

HAPTER

 10: C

ONFIGURING

 MAP A

CCESS

 P

OINTS

You can display the following MAP information:

„

MAP and radio-specific configuration settings

„

Connection information for Distributed MAPs configured on a WX

„

List of Distributed MAPs that are not configured on a WX

„

Connection information for Distributed MAPs

„

Service profile information

„

Radio profile information

„

Status information

„

Information about static IP addresses on Distributed MAPs

„

Statistics counters

„

Information about VLAN profiles configured for local switching

„

ARP table on an MSP

„

Forwarding Database (FDB) for an MSP

„

Information about the VLANs locally switched by a MAP

„

Information about ACLs used by the MAP

To display configuration information, use the following commands:

display ap config [apnumber [radio {1 | 2}]]

The command lists information separately for each MAP.

To display configuration information for MAP 59, type the following 
command:

WX1200# display ap config 59
AP 59: serial-id: 1231, AP model: MP-422, bias: high, name: 
AP59
        upgrade-firmware: YES
        force-image-download:  NO
        communication timeout: 10
        location:
        contact:
  Radio 1: type: 802.11g, mode: disabled, channel: dynamic
  tx pwr: 18, profile: default
  auto-tune max-power: default,
  load-balance-group: ,
  load-balance-enable: YES,