3com WXR100 3CRWXR10095A User Manual

The RF Auto-Tuning feature dynamically assigns channel and power 
settings to MAP radios, and adjusts those settings when needed. 
RF Auto-Tuning can perform the following tasks:

„

Assign initial channel and power settings when a MAP radio is started. 

„

Periodically assess the RF environment and change the channel or 
power setting if needed.

„

Change the transmit data rate or power to maintain at least the 
minimum data rate with all associated clients.

By default, RF Auto-Tuning is enabled for channel configuration but 
disabled for power configuration. 

(For more information, see Chapter 14, “Configuring RF Auto-Tuning,” 
on page 311.)

MSS contains one default radio profile, named default. To apply common 
parameters to radios, you can modify the default profile or create a new 
one. When you create a new profile, the radio parameters in the profile 
are set to their factory default values.

The channel number, transmit power, and external antenna parameters 
are unique to each radio and are not controlled by radio profiles. 
Table 13 lists the defaults for these parameters.

Table 13   Radio-Specific Parameters

Location of the radio’s antenna.

Note: This parameter applies 
only to MAPs that support 
external antennas.