Manualsbrain.com
  1. Manuals
  2. Brands
  3. 3com
  4. wx3010 ac poe 8get 2sfp
  5. User Manual

3com wx3010 ac poe 8get 2sfp User Manual

Download
Page of 99
 
1-6 
z
 
As a power sourcing equipment (PSE), the WX3000 series supports the IEEE 802.3af standard 
while being compatible with some PoE powered devices that do not comply with the 802.3af 
standard.  
z
 
The WX3000 series provides power supply through fixed electrical Ethernet ports, with the 
maximum power transmission distance of 100 meters (328.08 ft.).  
z
 
Each Ethernet port of the WX3000 series provides a maximum of 25 W output power to the 
attached PoE powered device. In the case of AC input, the maximum output power with full load of 
the WX3024 is 370 W, and that of the WX3010 and WX3008 is 125 W; in the case of RPS input, the 
maximum output power of the WX3024 is 25 W × 24 = 600 W (Note that the RPS output power 
should be at least 700 W).  
Components 
LEDs 
Table 1-6 lists the support of the WX3000 series for LEDs.  
Table 1-6 
LEDs supported by the WX3000 series 
LED 
WX3024 
WX3010 
WX3008 
Power status LED (PWR) 
Supported Supported 
Supported 
PoE/PoE+ status LED (Mode) Supported 
Supported 
Supported 
RPS status LED (RPS) 
Supported 
Not supported 
Not supported 
Gigabit Ethernet port status 
LEDs 
Supported Supported 
Supported 
Gigabit SFP port status LEDs 
Supported 
Supported 
Not supported 
Extension slot status LEDs 
(MOD1 and MOD2) 
Supported 
Not supported 
Not supported 
 
Table 1-7 shows the description of the LEDs status 
Table 1-7 
Description of the LEDs status 
LED 
Mark 
Status 
Description 
Solid green 
The system is going through the power on 
self test (POST) or downloading software.  
Blinking green (1 Hz)
The system is working normally.  
Solid red 
The system failed to pass the POST or has 
detected a serious fault.  
Solid yellow (1 Hz) 
At least one port has failed the POST or 
detected a minor fault.  
Power status 
LED 
(green/yellow/red
) 
PWR 
Off 
No AC input is present.