3com V7000 User Manual

 

Your administrator may allow you to reprogram a button’s function (for 
example, create more personal speed dial buttons). Consequently, a 
programmable button is one of the following states:

■

Locked — Button function can be changed only by the administrator.

However, if the button function requires additional information (for 
example, a speed dial number or a call forward destination number), 
you can choose the values for the parameters. There are two 
exceptions: 

■

BLF (Busy Lamp Field) — Displays the status of another user's 
phone. When you press the button associated with the BLF status 
light, the BLF function calls the other user’s phone. 

■

System Speed Dial — Dials an administrator-configured speed dial 
number.

The additional information for these two functions is set by the 
administrator and you cannot change the values if the buttons are 
in the locked state.

■

Unlocked — Button function and any associated values can be 
completely reconfigured by you or the administrator.

Note that, if a button function requires additional information (for 
example, a call forward destination number) and you or your 
administrator have not configured this information, the system will 
prompt you for it when you press the button.

As noted in 

, the programmable Access buttons for the 

Model 2102 phone are located in the right column of 12 buttons. The 
buttons are numbered, bottom to top, 1 through 12. The default, 3Com 
supplied button functions are shown in 

. Ask your administrator if 

these defaults have changed.

Table 4   3Com Default Button Mappings for the Model 2102 Telephone

12

Do Not Disturb

None

11

Call Forward All

Destination number

10

Personal Speed Dial #1

First personal speed dial 
number

9

Personal Speed Dial #2

Second personal speed dial 
number