3com TR User Manual
3-10
C
HAPTER
3: S
ETTING
U
P
FOR
M
ANAGEMENT
Setting Up the VT100 Console
This section provides instructions for setting up the
VT100 console for local or remote management.
VT100 console for local or remote management.
1
Connect a VT100-compatible terminal to the serial
port of the Switch 2000 TR. Configure the terminal to
the following settings:
port of the Switch 2000 TR. Configure the terminal to
the following settings:
■
9600 baud
■
8 data bits
■
1 stop bit
■
No parity
2
Press [Return] one or more times until the Switch
2000 Main Banner appears. See Figure 3-5.
2000 Main Banner appears. See Figure 3-5.
Figure 3-5 Main Banner
NOTE: You
cannot modify these settings. If your ter-
minal is already set up with these values, the Main
Banner appears as soon as power-up completes.
Banner appears as soon as power-up completes.
3
Press [Return] at the Main Banner.
4
Log on using the default name security and pass-
word security. See Figure 3-6.
word security. See Figure 3-6.
Figure 3-6 Logon Screen
5
Figure 3-7 Main Menu
6
Select the Management Setup option.
The 3Com Switch 2000 TR Management Setup screen
appears. See “Switch 2000 TR Management Setup Fields”.
appears. See “Switch 2000 TR Management Setup Fields”.