Arcam T31 User Manual

Page of 11
2
3
E
n
g
li
sh
Safety guidelines
CAUTION: To  reduce  the  risk  of  electric  shock,  do  not 
remove cover (or back). No user serviceable parts inside. 
Refer servicing to qualified service personnel.
WARNING: To reduce the risk of fire or electric shock, do 
not expose this apparatus to rain or moisture.
The lightning flash with an arrowhead symbol within an equilateral triangle, 
is intended to alert the user to the presence of uninsulated ‘dangerous 
voltage’ within the product’s enclosure that may be of sufficient magnitude to 
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the 
user to the presence of important operating and maintenance (servicing) 
instructions in the literature accompanying the product.
CAUTION:  In  Canada  and  the  USA,  to  prevent  electric 
shock, match the wide blade of the plug to the wide slot in 
the socket and insert the plug fully into the socket.
IMPORTANT SAFETY INSTRUCTIONS
This  product  is  designed  and  manufactured  to  meet  strict  quality 
and safety standards. However, you should be aware of the following 
installation and operation precautions:
1. Take heed of warnings and instructions
You  should  read  all  the  safety  and  operating  instructions  before 
operating  this  appliance.  Retain  this  handbook  for  future  reference 
and adhere to all warnings in the handbook or on the appliance.
2. Water and moisture
The presence of electricity near water can be dangerous. Do not use 
the appliance near water – for example next to a bathtub, washbowl, 
kitchen sink, in a wet basement or near a swimming pool, etc.
3. Object or liquid entry
Take care that objects do not fall and liquids are not spilled into the 
enclosure  through  any  openings.  Liquid  filled  objects  such  as  vases 
should not be placed on the equipment.
4. Ventilation
Do not place the equipment on a bed, sofa, rug or similar soft surface, 
or  in  an  enclosed  bookcase  or  cabinet,  since  ventilation  may  be 
impeded. We recommend a minimum distance of 50mm (2 inches) 
around  the  sides  and  top  of  the  appliance  to  provide  adequate 
ventilation.
5. Heat
Locate  the  appliance  away  from  naked  flames  or  heat  producing 
equipment  such  as  radiators,  stoves  or  other  appliances  (including 
other amplifiers) that produce heat.
6. Climate
The appliance has been designed for use in moderate climates.
7. Racks and stands
Only  use  a  rack  or  stand  that  is  recommended  for  use  with  audio 
equipment. If the equipment is on a portable rack it should be moved 
with great care, to avoid overturning the combination.
8. Cleaning
Unplug the unit from the mains supply before cleaning.
The case should normally only require a wipe with a soft, damp, lint-
free cloth. Do not use paint thinners or other chemical solvents for 
cleaning.
We do not advise the use of furniture cleaning sprays or polishes as 
they can cause indelible white marks if the unit is subsequently wiped 
with a damp cloth.
9. Power sources
Only connect the appliance to a power supply of the type described in 
the operating instructions or as marked on the appliance.
10. Power-cord protection
Power supply cords should be routed so that they are not likely to be 
walked on or pinched by items placed upon or against them, paying 
particular attention to cords and plugs, and the point where they exit 
from the appliance.
11. Grounding
Ensure that the grounding means of the appliance is not defeated.
12. Power lines
Locate any outdoor antenna/aerial away from power lines.
13. Non-use periods 
If  the  unit  has  a  standby  function,  a  small  amount  of  current  will 
continue to flow into the equipment in this mode. Unplug the power 
cord of the appliance from the outlet if left unused for a long period 
of time.
14. Abnormal smell
If an abnormal smell or smoke is detected from the appliance, turn 
the power off immediately and unplug the unit from the wall outlet. 
Contact your dealer immediately.
15. Servicing
You  should  not  attempt  to  service  the  appliance  beyond  that 
described in this handbook. All other servicing should be referred to 
qualified service personnel.
16. Damage requiring service
The  appliance  should  be  serviced  by  qualified  service  personnel 
when:
A.  the power-supply cord or the plug has been damaged, or
B.  objects have fallen, or liquid has spilled into the appliance, or
C.  the appliance has been exposed to rain, or
D.  the appliance does not appear to operate normally or exhibits 
a marked change in performance, or
E.  the appliance has been dropped or the enclosure damaged.
SAFETY COMPLIANCE
This product has been designed to meet the IEC 60065 international 
electrical safety standard.
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
ATTENTION
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN