AEG 7200 User Manual

Instructions for use

30

In the event of a fault, try to solve the problem yourself with the aid of 
the information provided here. If you call Customer Service to deal 
with one of the faults listed here or to remedy an operating fault, the 
customer service technician's visit will not be free of charge, even dur-
ing the warranty period.
• If the fault code E10, E20 or E40 is shown in 

the multidisplay, you may be able to remedy 
the fault yourself (see Faults Table below). 
When you have remedied the fault, press the START/PAUSE (START/
PAUZE, MARCHE/PAUSE) button. 

• With all other displayed faults (E plus number or letter): switch appli-

ance off and on again. Reset the wash programme and press the 
START/PAUSE button. 

If the fault code is displayed again, please contact the Customer Service 
department quoting the fault code.

The machine does not 
work.

The plug is not in the socket. Insert the plug.

The fuse or protection device 
has tripped.

Replace/reset the fuse.

The machine door was not 
closed properly.

Close the door. You should 
hear the door engage.

The START/PAUSE (START/
PAUZE, MARCHE/PAUSE) 
button was not pressed long 
enough.

Press the START/PAUSE 
(START/PAUZE, MARCHE/
PAUSE) until the Programme 
begins.

The door will not close.

The child safety device has 
been set.

Release the child safety de-
vice (see “Childsafety de-
vice”).

Error code 

E40 

ap-

pears. The MAIN WASH 
(HOOFDWAS, LAVAGE) 
indicator flashes.

The door is not closed 
properly. 

Close the door properly.
Start the programme again.