AEG 7200 User Manual

Instructions for use

31

The water does not 
flow.

Error code 

E10 

ap-

pears. The SPIN (CEN-
TRIFUG., 
ESSORAGE) indicator 
flashes. 

The water supply tap is 
closed.

Open the tap. Start the 
programme again.

The filter in the water inlet 
hose coupling is clogged.

Close the water tap. 
Unscrew the hose from the 
water supply tap, take out 
the filter and rinse it under 
the kitchen tap

The water supply tap is 
blocked with limescale, or is 
faulty. 

Check the supply tap, have it 
repaired if necessary. 

The washing machine is 
noisy, or vibrates in use.

The locking devices were not 
removed. 

Remove locking devices as 
described in the Installation 
and Connection instructions.

The adjustable feet are not 
set to the correct height. 

Set the feet as described 
in the Installation and 
Connection instructions.

There are very few items of 
washing (for example, one 
dressing gown) in the drum. 

Operation is not affected.

The water could not be 
pumped out completely be-
fore spinning, as there is 
a kink in the outlet hose, 
or detergent solution pump 
is clogged. 

Check the condition of the 
outlet hose, and straighten 
any kinks or folds, or clean 
the detergent solution pump, 
removing any foreign bodies 
from the pump casing if re-
quired.

The detergent solution 
in the main wash 
foams excessively. 

Too much detergent was 
probably used. 

Follow precisely the manu-
facturer's instructions on the 
amount of detergent to use.