HP C7000 User Manual

 

Removal and replacement procedures  33 

4. 

Lift the left side of the device bay shelf to disengage the three tabs from the divider wall, and then 

remove it from the enclosure. 

 

To replace the component, reverse the removal procedure. 

 

Half-height or full-height blade 

  

 

CAUTION: 

 This procedure provides instructions for replacement of a failed part only. To 

change the configuration of components, see the appropriate HP BladeSystem c-Class 

enclosure setup and installation guide. 

  

To remove the component: 

1. 

Identify the proper half-height or full-height blade in the enclosure ("

2. 

Back up all data. 

3. 

Power down the half-height or full-height blade ("

4. 

Remove the blade: