HP C7000 User Manual
Removal and replacement procedures 35
o
Full-height blades: bays 1-5 ("
" on page
o
Device bay blanks: bays 9-13 ("
" on page
o
Power supplies or blanks: bays 1-4 ("
3.
Remove the three T-10 Torx screws that secure the Insight Display cable center cover, and then
remove the cover.
remove the cover.
4.
Remove the two T-10 Torx screws that secure the Insight Display cable contour cover, and then
remove the cover.
remove the cover.
5.
Disconnect the Insight Display cable.
6.
Remove the two T-10 Torx screws that secure the Insight Display.
7.
Remove the upper brace.
8.
Tilt the Insight Display forward and remove it from the enclosure.