HP designjet l65500 Service Manual
Tr
ou
bles
hooting
206
Troubleshooting
•
The location where the forks of a forklift truck can be entered are shown below with two arrows
Perform the following diagnostics
•
3.6 Vacuum
In case the diagnostic test fails check the following:
In case the diagnostic test fails check the following:
•
The forklift guides are in places, with all the screws (previous item).
•
The tubes are correctly connected, to the tube set to the furthest part from the vacuum bars.
•
3.7 OMAS, check mainly the temperatures reported.
•
3.2 Front spindle test (spindle in place, latches close, but no media loaded)
•
3.3 Rear spindle test (spindle in place, latches close, but no media loaded)
•
Place few dots of oil (use the bottle of oil available within the cleaning kit). 2 possibilities to place
this oil:
•
•
Quickest way: place few dots of oil on the gear of the side plate, just under the spindle, on the
Media input and Media output.
•
But also add few dots of oils on the other gears of the side plate gears assy: slide the metal
cover protecting the side plate gear (front and rear, here is an example from the front side
plate):
•
Then place few dots of oil on each gear, and mount back this metal plate, to be done on the
front right and rear right side plate.