HP designjet l65500 Manuale Di Servizio

206

Troubleshooting

•

The location where the forks of a forklift truck can be entered are shown below with two arrows

•

3.6 Vacuum 
In case the diagnostic test fails check the following:

•

The forklift guides are in places, with all the screws (previous item). 

•

The tubes are correctly connected, to the tube set to the furthest part from the vacuum bars. 

•

3.7 OMAS, check mainly the temperatures reported. 

•

3.2 Front spindle test (spindle in place, latches close, but no media loaded) 

•

3.3 Rear spindle test (spindle in place, latches close, but no media loaded) 

•

Place few dots of oil (use the bottle of oil available within the cleaning kit). 2 possibilities to place 

this oil: 
•

Quickest way: place few dots of oil on the gear of the side plate, just under the spindle, on the 

Media input and Media output. 

•

But also add few dots of oils on the other gears of the side plate gears assy: slide the metal 

cover protecting the side plate gear (front and rear, here is an example from the front side 

plate): 

•

Then place few dots of oil on each gear, and mount back this metal plate, to be done on the 

front right and rear right side plate.