HP dv2500 User Manual
RTC battery
NOTE:
Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all passwords
and CMOS settings to be cleared.
Description
Spare part number
RTC battery (includes 2-sided tape)
417076-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the hard drive cover (see
).
Remove the RTC battery:
1.
Disconnect the RTC battery cable (1) from the system board.
2.
Remove the RTC battery (2).
Reverse this procedure to install the RTC battery.
50
Chapter 4 Removal and replacement procedures