HP omnibook xe3 Service Manual
HP OmniBook XE3
Removal and Replacement
2-23
Removing the Hinge Saddle Set
(HP Authorized Service Providers Only)
Required Equipment
•
Small Phillips screwdriver.
Removal Procedure
1.
Unplug the AC adapter, if present, and remove the battery.
2.
Remove these additional assemblies:
•
Keyboard cover (page 2-9).
•
Keyboard (page 2-11).
•
Display assembly (page 2-17).
•
Top case (page 2-19).
3.
Remove the two retaining screws from the bottom case.
Figure 2-17. Removing the Hinge Saddle Retaining Screws
Screws,
M2.5x8 mm
M2.5x8 mm