HP omnibook xe3 Service Manual
HP OmniBook XE3
Removal and Replacement
2-27
Removing the Heatsink Assembly (with Fan)
(HP Authorized Service Providers Only)
Required Equipment
•
Small Phillips screwdriver.
Removal Procedure
1.
Unplug the AC adapter, if present, and remove the battery.
2.
Remove these additional assemblies:
•
Keyboard cover (page 2-9).
•
Keyboard (page 2-11).
•
Display assembly (page 2-17).
•
Top case (page 2-19).
•
Hinge saddle set (page 2-22).
3.
Disconnect the fan cable from the motherboard.
4.
Remove all four retaining screws (their springs are attached to them).
5.
Lift the heatsink out of the notebook.