HP pavilion tx2000 Service Manual
Top cover
Description
Spare part number
Top cover (includes TouchPad and TouchPad cable, caps lock light board and cable, and top cover
bumper pads)
464111-001
Before removing the top cover, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power cord.
4
.
Remove the battery (see
5
.
Remove the following components:
a
b
)
c
. Keyboard (see
d
. Switch cover (see
e
)
Remove the top cover:
1
.
Turn the computer upside down, with the front toward you.
2
.
Remove the five Phillips PM2.0×7.0 screws (1) and the three Phillips PM2.0×4.0 screws (2) that
secure the top cover to the computer.
3
.
Turn the computer right-side up, with the front toward you.
4
.
Disconnect the display lid switch board cable (1) from the system board.
54 Chapter 4 Removal and replacement procedures