HP photosmart r607 User Manual

Page of 179
14
HP Photosmart R507/R607 User’s Manual
Installing the Battery
Your camera uses a rechargeable HP Photosmart R07 lithium 
ion battery (L1812A).
NOTE 
The battery that was shipped with your camera is 
partially charged, but you should fully charge it before 
using it the first time. You can charge the battery while it is 
in the camera. See 
1
If the Battery/Memory card door is already open, skip this 
step and go on to step 2.
Hold the camera with the bottom facing 
up, as shown, and slide the Battery/
Memory card door latch to open the 
Battery/Memory card door.
2
Insert the battery in the larger slot 
as shown, and push it in until the 
latch catches.
3
Close the Battery/Memory card 
door on the bottom of the camera 
by pushing the door down until it 
snaps closed.
To remove the battery from the camera, first turn the camera 
off. Then open the Battery/Memory card door, release the 
battery latch, tilt the camera, and the battery will slide out of 
its slot.