HP r12000 xr User Manual

Starting Up 

x Alarms 

The full UPS or a single electronics module (hot-swap) is ramping 
up. 

Module Failure 

x Alarms 

At least one electronics module or the Supervisory Board has 
experienced a critical failure and is off-line. 

Unknown Stats x 

x Alarms 

The UPS issues an unrecognized status code of x. This is normal in 
certain situations, such as when the UPS is busy or powering down. 

UPS Supporting Load 

x Alarms 

The UPS is powering the load. 

Select Module Mx to display Status and Alarms for an electronics module. The variable x 
indicates one of the electronics modules (Module M1-M4). Table 3-4 lists the possible status 
options. Refer to the section, “LCD Alarm Troubleshooting,” in Chapter 5 for a descriptive 
list of alarm causes and solutions. 

 

Status: Select 

Module Mx 

 

System Normal 

Submodule Status 
+ Active Alarm 
Count 

0 Alarms 

In this example, the UPS has detected no problems 
with the electronics module and there are no 
alarms. 

Module Mx 

Submodule not 
Detected 

Not Detected 

Module Mx is not detected (x is 1-4).  

Either an electronics module is not installed, or the 
UPS is gathering system configuration information 
during initialization. This condition should not 
persist for more than 60 seconds after startup.