Canon imageclass d1170 multifunction printer 3478b018aa User Manual
Fax (D1180/D1170/D1150)
6-22
Specifying Destinations
1
Place documents.
2
Press
[SEND/FAX]/
[FAX].
3
Press
[SEND/FAX] repeatedly to
select <FAX>, then press [OK].
S E L E C T : O K
F A X
For the D1150, skip this step.
4
Press the one-touch key or [Coded
Dial] followed by the three-digit code
under which the desired address group is
registered.
[ 0 3 ] C a n o n
G R O U P D I A L
Ex.
If you pressed a wrong key or code, press
[Stop/Reset], then try again from step 3.
5
Press [Start].
When you place the documents on the platen
glass, press
or
to select the document
size, then press [Start] for each document.
When scanning is complete, press [OK] to
start sending.
You can also adjust the following scan
You can also adjust the following scan
settings as necessary, using the keys on the
operation panel, after specifying the
destination in step 4.
–
–
Density: See “Adjusting Density,” on p. 6-29.
Image Quality: See “Selecting Image Quality,”
on p. 6-30.
2-Sided: See “2-Sided Documents,” on p. 6-
31.
Image Quality: See “Selecting Image Quality,”
on p. 6-30.
2-Sided: See “2-Sided Documents,” on p. 6-
31.
When <TIME OUT> is set to <ON> in <TX
SETTINGS> in <FAX SETTINGS> in <TX/RX
SETTINGS>, and if you have specified the
destination by any other method than using –
SETTINGS> in <FAX SETTINGS> in <TX/RX
SETTINGS>, and if you have specified the
destination by any other method than using –
, [numeric keys] and [Tone], the machine
starts scanning automatically without pressing
[Start], after the preset time for this setting is
elapsed. (See “Time Out Mode,” on p. 6-41.)
Using the Address Book Key
[Address Book] search enables you to search for a
recipient registered in the machine. This is useful
when you forget which one-touch key or coded dial
code the recipient you want is registered under.
recipient registered in the machine. This is useful
when you forget which one-touch key or coded dial
code the recipient you want is registered under.
To use this feature, you must register destinations in the one-
touch keys or coded dial codes beforehand. (See “Storing/
Editing One-Touch Keys,” on p. 5-3 or “Storing/Editing Coded
Dial Codes,” on p. 5-12.)
A maximum of 201 destinations can be specified at the same
time. (Out of the 200 destinations, a number or address can be
specified with – , [numeric keys] and [Tone].) If you
specify a group, which is made up of several destinations,
each destination in the group is counted as a separate
address.
touch keys or coded dial codes beforehand. (See “Storing/
Editing One-Touch Keys,” on p. 5-3 or “Storing/Editing Coded
Dial Codes,” on p. 5-12.)
A maximum of 201 destinations can be specified at the same
time. (Out of the 200 destinations, a number or address can be
specified with – , [numeric keys] and [Tone].) If you
specify a group, which is made up of several destinations,
each destination in the group is counted as a separate
address.
1
Place documents.
•
•
•
•
–
–