Canon imageclass mf4890dw User Manual
59
Fa
x
x
6
Press [
] (Redial/Pause), and then press [OK].
•
A pause added to the end of the number is fi xed at 10 seconds.
7
Press [
] (Start).
Calling a Recipient before Sending a Fax
In the following cases, follow the procedure below to send faxes:
•
If you want to call a recipient before sending a fax
•
If the recipient’s machine cannot receive a fax automatically
To use this function, you must connect the handset or an external telephone
to the machine. If they are not connected, use another telephone to make
sure the recipient to switch the fax mode to receive fax.
to the machine. If they are not connected, use another telephone to make
sure the recipient to switch the fax mode to receive fax.
1
Place your documents (
→
2
Switch to the Fax mode (
→
p.16).
3
Lift the telephone receiver.
•
A dial tone sounds.
4
Dial the recipient’s fax number.
5
Ask the recipient to allow his or her machine to receive faxes.
6
When you hear a beep, press [
] (Start), and then replace the
telephone receiver.