Canon imageclass 2300 Information Guide

Copy Operations

Copying - Basic Operations

● If you want to cancel a copy job in the standby mode:

❑

Press [Stop].

The display for selecting a copy job to cancel appears.

❑

Press [F2] (

▼) or [F3] (▲) to select the copy job you want to cancel ➞ press 

[F4] (CANCEL).

The selected job is canceled.

NOTE

 

After pressing 

 (Stop), several copies may continue to print out.

You can also cancel a copy job from the System Monitor screen. (See Chapter 1, 
"Introduction to Copying," in the Copying Guide.)

● If you want to interrupt a copy job:

❑

To interrupt a copy job when you need to make priority copies, press [Interrupt]. 

For instructions on interrupting a copy job, see Chapter 1, "Introduction to 
Copying," in the Copying Guide.

The message <ABLE TO PERFORM INTERRUPT JOB> appears on the LCD 
display.

● If you want to reserve a copy job and scan an original while the 

❑

Place your original 

➞ press [Start].

For instructions on reserving a copy job, see Chapter 1, "Introduction to 
Copying," in the Copying Guide.

For instructions on using Department ID Management, see Chapter 5, "System 
Manager Settings," in the Reference Guide.