Canon pixma mp180 User Manual

Page of 128
Chapter 10 
105
Troubleshooting
„
Error No.: 300 Is Displayed
„
Error No.: 1700/1710 Is Displayed
„
Error No.: 2001 Is Displayed
Cause
Action
The machine is not ready.
Ensure that the ON/OFF lamp on the Operation Panel is on.
If the lamp on the Operation Panel is off, turn the machine ON.
If the Alarm lamp is on, an error may occur in the machine. For details on how to 
resolve the error, refer to “An Error Message Is Displayed On The LCD/LED” on 
page 86.
Machine is not properly 
connected.
Ensure that the USB cable is securely connected to the computer.
z
If using a switching hub or other device, disconnect the machine and reconnect 
it directly to the computer and try printing again. If successful, the problem may 
have been with the device.
z
There could also be a problem with the cable(s). Replace the cable(s) and try 
printing again.
Machine you want to use is 
not selected on the [Printer] 
popup menu on the [Print] 
dialog box.
Select your machine on the [Printer] pop-up menu on the [Print] dialog box.
If your machine does not appear on the [Printer] pop-up menu, add the Machine 
following the procedures described in the Easy Setup Instructions
.
Cause
Action
The ink absorber is almost 
full.
Ink used for cleaning is absorbed in a ink absorber placed in the machine.
Press [OK] to cancel the error so that you can continue printing. Once the ink 
absorber becomes completely full, printing cannot be done until the ink absorber 
is replaced.
Canon recommends to contact a Canon service representative as soon as 
possible.
Cause
Action
A specified period of time 
has elapsed without 
receiving a response from 
the digital camera. /The 
digital camera or digital 
video camcorder connected 
is not compatible with this 
machine.
Disconnect the camera cable and reconnect the cable.
Depending on the model or brand of your device, you may have to select a print 
mode compliant with PictBridge before connecting the device.
You may also have to turn ON the device or select Play mode manually after 
connecting the device to the machine. Perform necessary operations according to 
the instruction manual supplied with your device.
If the error is still unresolved, there is a possibility that you are using a digital 
camera or digital video camcorder that is not supported by this machine. Use a 
digital cameras or digital video camcorder compatible with this machine.
downloadlike
ArtboardArtboardArtboard
Report Bug