Canon pixma mp180 User Manual

Page of 128
Chapter 10 
 To resume printing, you can press [OK] (MP180) / [Black] or [Color] (MP160) on the machine 
instead of selecting [Continue].
Waste tank (ink absorber) full / Ink 
absorber full 
This error message indicates that the ink absorber is nearly full.
The machine has a built-in ink absorber to hold the ink used during 
FINE Cartridge cleaning, for example.
You can continue printing by selecting Continue
 on the display on 
your camera.
However, because printing is disabled once the ink absorber becomes 
completely full and until the ink absorber is replaced, you are 
recommended to contact a Canon service representative as early as 
No ink
Prepare a new FINE Cartridge.
Select Continue
 in the display on your camera to resume printing.
Replace the FINE Cartridge and close the Scanning Unit.
If printing is in progress and you want to continue printing, press 
[OK] (MP180) / [Black] or [Color] (MP160) with the FINE Cartridge 
Then printing can continue under the ink out condition by selecting 
 on the display on your camera.
Replace the empty FINE Cartridge immediately after the printing. The 
machine may be damaged if printing is continued the ink out 
The FINE Cartridge may not be the compatible with this machine. 
Install the appropriate FINE Cartridge.
Printer error
An error requiring servicing might have occurred.
Disconnect the cable between the machine and the camera, turn OFF 
the machine, and unplug the power cord of the machine from the power 
supply. After a while, plug the power cord of the machine back in, turn 
ON the machine, and then reconnect the camera to the machine. If the 
same error occurs, contact a Canon service representative.
Error message on camera
Report Bug