Sony 3-284-083-41(1) User Manual

Page of 72
64
GB
There is no sound from one of the front 
speakers.
• Connect a pair of headphones to the 
PHONES jack to verify that sound is 
output from the headphones. If only one 
channel is output from the headphones, the 
component may not be connected to the 
receiver correctly. Check that all the cords 
are fully inserted into the jacks on both the 
receiver and the component. If both 
channels are output from the headphones, 
the front speaker may not be connected to 
the receiver correctly. Check the 
connection of the front speaker which is 
not outputting any sound.
• Make sure you have connected to both the 
L and R jacks of an analog component, and 
not only to either the L or R jack. Use an 
audio cord (not supplied).
There is no sound from digital sources 
(from OPTICAL input jack) when 
selecting SAT input.
• Check that the INPUT MODE is not set to 
• Check that ANALOG DIRECT is not set 
to on.
The left and right sounds are 
unbalanced or reversed.
• Check that the speakers and components 
are connected correctly and securely.
• Adjust the balance parameters using the 
LEVEL menu.
There is severe hum or noise.
• Check that the speakers and components 
are connected securely.
• Check that the connecting cords are away 
from a transformer or motor, and at least
 
3 m away from a TV set or fluorescent 
light.
• Move your audio components away from 
the TV.
• The plugs and jacks are dirty. Wipe them 
with a cloth slightly moistened with 
alcohol.
There is no sound, or only a very low-
level sound is heard from the center/
surround speakers.
• Select a CINEMA STUDIO EX mode 
• Adjust the speaker level (page 30).
• Make sure the center/surround speakers 
are set to either “SMALL” or “LARGE” 
(page 36).
There is no sound from the sub woofer.
• Check that the sub woofer is connected 
correctly and securely.
• Make sure you have turned on your sub 
woofer.
• Make sure the sub woofer is set to “YES” 
• There is no sound from the sub woofer 
depending on the sound field.
There is no sound from the component 
connected to the DIGITAL MEDIA PORT 
adapter.
• Adjust the volume of this receiver.
• The DIGITAL MEDIA PORT adapter 
and/or component is not connected 
correctly. Turn off the receiver, then 
reconnect the DIGITAL MEDIA PORT 
adapter and/or component.
• Check the DIGITAL MEDIA PORT 
adapter and/or component device to make 
sure it supports this receiver.