Sony 3-284-083-41(1) User Manual

Ad
dit
ion
al I

rmatio

There is no sound from the speakers of
the receiver when you connect the
receiver and the playback component
via a HDMI connection.

• Make sure that you have connected the

digital audio jacks on the playback
component to the receiver. Then, turn off
TV’s volume or activate the TV’s muting
function.

The surround effect cannot be
obtained.

• Make sure the sound field function is on

(press MOVIE, or MUSIC).

• Sound fields do not function for signals

with a sampling frequency of more than

48 kHz.

Dolby Digital or DTS multi channel
sound is not reproduced.

• Check that the DVD, etc. you are playing

is recorded in Dolby Digital or DTS
format.

• When connecting the DVD player, etc., to

the digital input jacks of this receiver,
check the audio setting (the settings for the
audio output) of the connected component.

Video

There is no picture or an unclear
picture appears on the TV screen.

• Select the appropriate input using the input

buttons.

• Set your TV to the appropriate input mode.
• Move your audio components away from

the TV.

The source image input to the HDMI
jack on the receiver is not output from
the TV.

• Check the HDMI connection.
• Depending on the playback component,

you may need to set up the component.
Refer to the operating instructions
supplied with each component.

Recording cannot be carried out.

• Check that the components are connected

correctly.

• Select the source component using the

input buttons.

Tuner

The FM reception is poor.

• Use a 75-ohm coaxial cable (not supplied)

to connect the receiver to an outdoor FM
antenna (aerial) as shown below. If you
connect the receiver to an outdoor antenna
(aerial), ground it against lightning. To
prevent a gas explosion, do not connect the
ground wire to a gas pipe.

ANTENNA

Receiver

To ground

Ground wire
(not supplied)

Outdoor FM antenna (aerial)

continued