Sony BDVN8100W User Manual

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 
01)\4456334121_US (U)\090SET.fm

masterpage: Left

x [Attenuate - AUDIO]
Distortion may occur when you listen to an 
equipment connected to the AUDIO 
(AUDIO IN L/R) jacks. You can prevent 
distortion by attenuating the input level on 
the main unit.

[On]: Attenuates the input level. The output 
level will decrease at this setting.
[Off]: Normal input level.

x [Audio Output]
You can select the output method where the 
audio signal is output.

[Speaker]: Outputs multi-channel sound 
from the system’s speakers only.
[Speaker + HDMI]: Outputs multi-channel 
sound from the system’s speakers and 
2-channel linear PCM signals from the 
HDMI (OUT) jack.
[HDMI]: Outputs sound from the HDMI 
(OUT) jack only. Sound format depends on 
the connected equipment.

• When [Control for HDMI] is set to [On] 

(page 64), [Audio Output] is set to [Speaker + 
HDMI] automatically and this setting cannot be 
changed.

• When [Audio Output] is set to [HDMI], the 

output signal format for the “TV” function is 
2-channel linear PCM.

x [Sound Effect]
You can turn on or off the system’s sound 
effects (SOUND MODE setting 

(page 33))

. 

For a 2-channel source, you can select 
[Dolby Pro Logic], [DTS Neo:6 Cinema], 
or [DTS Neo:6 Music] to simulate surround 
sound.

[Sound Mode On]: Enables the surround 
effect of the sound mode 

and 

Football mode (page 34).

[Dolby Pro Logic]: The system simulates 
surround sound from 2-channel sources 
and outputs sound from all speakers 
(5.1 channel) (Dolby Pro Logic decoding).
[DTS Neo:6 Cinema]/[DTS Neo:6 Music]: 
The system simulates surround sound from 
2-channel sources and produces multi-
channel sound (DTS Neo:6 Cinema/DTS 
Neo:6 Music mode decoding).
[2ch Stereo]: This system outputs the sound 
from the front left/right speakers and 
subwoofer only. Multi-channel surround 
formats are downmixed to 2-channel.
[Off]: The sound effects are disabled. You 
can hear sound as it is recorded.

x [Speaker Settings]
To obtain optimum surround sound, set the 
speakers. For details, see “Setting the 
Speakers” (page 51).

x [Auto Calibration]
You can calibrate the appropriate settings 
automatically. For details, see “Calibrating 
the Appropriate Speaker Settings 
Automatically” (page 50).

x [Bluetooth AUDIO - AAC]
You can enable and disable AAC audio.

[On]: AAC audio if the Bluetooth device 
supports AAC. 
[Off]: SBC audio.

You can enjoy high quality sound if the AAC is 
enabled. In case you cannot listen to AAC sound 
from your device, select [Off].