Sony cdx-c8000r User Manual

DIS
• D.Info (Dual Information) – to display the

clock and the play mode at the same time
(on) or to display the information alternately
(off).

• Amber/Green* – to change the illumination

colour to amber or green.

• SA (Spectrum Analyzer) – to change the

display pattern of the equalizer display.

• Dimmer – to change the brightness of the

display.
— Select “Auto” to dim the display only

when you turn the lights on.

— Select “on” to dim the display.
— Select “off” to deactivate Dimmer.

• Contrast – to adjust the contrast if the

indications in the display are not
recognisable because of the unit‘s installed
position.

• M.Dspl (Motion display) – to turn the motion

display to 1, 2 , or off.

• A.Scrl (Auto Scroll) (page 13)

* CDX-C8000R/MDX-C8500R only

SND
• EQ Tune (Equalizer tuning) – to adjust the

frquency and volume level of equalizer
curve.

• Front HPF (High pass filter for the front pre-

output) – to select the cut-off frequency of the
front pre-output.

• Rear HPF (High pass filter for the rear pre-

output) – to select the cut-off frequency of the
rear pre-output.

• SUB LPF (Low pass filter for the subwoofer

output) – to select the rcut-off frequency of
the subwoofer output.

continue to next page t

Press (ATT) on the rotary commander or
the card remote commander.
“ATT on” flashes momentarily.

To restore the previous volume level, press
(ATT) again.

The following items can be set:

SET
•Clock (page 9)
•CT (Clock Time) (page 24)
•Beep – to turn on or off the beeps.
•RM (Rotary Commander) – to change the

operative direction of the controls of the
rotary commander.
— Select “norm” to use the rotary

commander as the factory-set position.

— Select “rev” when you mount the rotary

commander on the right side of the
steering column.

•Multi language (language selection) – to

change the display language to English,
Spanish, Portuguese, or Swedish.