Sony CDX-C7850R User Manual
14
RDS
Overview of the RDS
function
function
Radio Data System (RDS) is a broadcasting
service that allows FM stations to send
additional digital information along with the
regular radio programme signal. Your car
stereo uses this system to offer you a variety of
services. Here are just a few: retuning to the
same programme automatically, listening to
traffic announcements, and locating a station
by programme type.
service that allows FM stations to send
additional digital information along with the
regular radio programme signal. Your car
stereo uses this system to offer you a variety of
services. Here are just a few: retuning to the
same programme automatically, listening to
traffic announcements, and locating a station
by programme type.
N o t e s
• Depending on the country or region, not all of
• Depending on the country or region, not all of
the RDS functions are available.
• RDS may not work properly if the signal strength
is weak or if the station you are tuned to is not
transmitting RDS data.
transmitting RDS data.
Displaying the station
name
name
The name of the current station lights up in the
display.
display.
Select an FM station (page 13).
When you tune in an FM station that
transmits RDS data, the station name
appears in the display.
When you tune in an FM station that
transmits RDS data, the station name
appears in the display.
N o t e
The “*” indication means that an RDS station is
being received.
The “*” indication means that an RDS station is
being received.
If FM stereo reception is poor
— Monaural Mode
— Monaural Mode
1
During radio reception, press (SHIFT),
then press (4) (PLAY MODE) repeatedly
until “Mono” appears.
then press (4) (PLAY MODE) repeatedly
until “Mono” appears.
2
Press (5) (n) repeatedly until “Mono
on“ appears.
The sound improves, but becomes
monaural (“ST” disappears).
on“ appears.
The sound improves, but becomes
monaural (“ST” disappears).
3
Press (SHIFT).
To return to normal mode, select “Mono off”
in step 2 above.
in step 2 above.
Changing the display items
Each time you press (DSPL), the item changes
as follows:
as follows:
Frequency ˜ Clock
After you select the desired item, the display
will automatically change to the Motion
Display mode after about a few seconds.
In the Motion Display mode, all the above
items are scrolled in the display one by one in
order.
will automatically change to the Motion
Display mode after about a few seconds.
In the Motion Display mode, all the above
items are scrolled in the display one by one in
order.
T i p
The Motion Display mode can be turned off. (See
”Changing the sound and display settings” on
page 23).
The Motion Display mode can be turned off. (See
”Changing the sound and display settings” on
page 23).