Sony CDX-C7850R User Manual
22
Press (OFF) to turn
off the unit.
off the unit.
Changing the operative direction
The operative direction of controls is factory-
set as shown below.
set as shown below.
If you need to mount the rotary commander on
the righthand side of the steering column, you
can reverse the operative direction.
the righthand side of the steering column, you
can reverse the operative direction.
Press (SOUND) for two seconds while
pushing the VOL control.
pushing the VOL control.
Tip
You can also change the operative direction of
these controls with the unit (see “Changing the
sound and display settings” on page 23).
You can also change the operative direction of
these controls with the unit (see “Changing the
sound and display settings” on page 23).
To increase
To decrease
Rotate the VOL control to
adjust the volume.
adjust the volume.
Press (ATT) to
attenuate the
sound.
attenuate the
sound.
Press (SOUND) to adjust the
volume and sound menu.
volume and sound menu.
OFF
Press (LIST) to:
• Display the memorised names.
• Display the programme type.
• Display the memorised names.
• Display the programme type.
Other operations
Adjusting the sound
characteristics
characteristics
You can adjust the equalizer curve, listening
position, cut-off frequency, bass, treble,
balance and fader.
You can store the bass and treble levels
independently for each source.
position, cut-off frequency, bass, treble,
balance and fader.
You can store the bass and treble levels
independently for each source.
1
Select the item you want to adjust by
pressing (SOUND) repeatedly.
pressing (SOUND) repeatedly.
VOL (volume) n EQ (equalizer curve)* n
POS (listening position)* n
SUB (subwoofer volume) n
CNW (crossover network)* n
BAS (bass) n TRE (treble) n
BAL (left-right) n FAD (rear-front)
POS (listening position)* n
SUB (subwoofer volume) n
CNW (crossover network)* n
BAS (bass) n TRE (treble) n
BAL (left-right) n FAD (rear-front)
* If the corresponding optional equipment is
not connected, this item will not appear.
2
Adjust the selected item by rotating the
dial.
Adjust within three seconds after selecting
the item. (After three seconds, the dial
function reverts volume control.)
dial.
Adjust within three seconds after selecting
the item. (After three seconds, the dial
function reverts volume control.)
Attenuating the sound
Press (ATT) on the supplied rotary
commander or optional wireless remote.
“ATT on” lights up for a second.
commander or optional wireless remote.
“ATT on” lights up for a second.
To restore the previous volume level, press
(ATT) again.
(ATT) again.
Tip
The unit decreases the volume automatically when
a telephone call comes in (Telephone ATT
function).
The unit decreases the volume automatically when
a telephone call comes in (Telephone ATT
function).