Sony CDX-R3350C User Manual
10
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm
masterpage:Left
1
During FM reception, press a number button
((1) to (6)) on which a local station is stored.
((1) to (6)) on which a local station is stored.
2
Within 5 seconds, press again a number button
of the local station.
Repeat this procedure until the local station is
received.
of the local station.
Repeat this procedure until the local station is
received.
Selecting PTY
1
Press
(PTY)
during FM reception.
The current programme type name appears if
the station is transmitting PTY data.
the station is transmitting PTY data.
2
Press
(PTY)
repeatedly until the
desired programme type appears.
3
Press
(SEEK)
+/–.
The unit starts to search for a station
broadcasting the selected programme type.
broadcasting the selected programme type.
With the card remote commander
In step 2, to select the programme type, press
In step 2, to select the programme type, press
M
or
m
.
Type of programmes
Note
You cannot use this function in countries/regions
where no PTY data is available.
You cannot use this function in countries/regions
where no PTY data is available.
Setting CT
1
Set “CT-ON” in setup (page 11).
Notes
• The CT function may not work even though an RDS
• The CT function may not work even though an RDS
station is being received.
• There might be a difference between the time set by
the CT function and the actual time.
Other functions
Changing the sound
settings
settings
Adjusting the sound
characteristics — BAL/FAD/SUB
characteristics — BAL/FAD/SUB
You can adjust the balance, fader and subwoofer
volume.
volume.
1
Press
(SEL)
repeatedly until “BAL,”
“FAD” or “SUB” appears.
The item changes as follows:
LOW
*
1
t
MID
*
1
t
HI
*
1
t
BAL
(left-right)
t
FAD
(front-rear)
t
SUB
(subwoofer volume)*
2
*1
When EQ3 is activated (page 10).
*2
When the audio output is set to “SUB”
(page 11).
(page 11).
“ATT” is displayed at the lowest setting, and can
be adjusted up to 20 steps.
be adjusted up to 20 steps.
2
Press the volume +/– button
repeatedly to adjust the selected item.
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2, to adjust the selected item, press
In step 2, to adjust the selected item, press
<
,
M
,
,
or
m
.
Adjusting the equalizer curve
— EQ3
You can adjust and store the equalizer settings
for different tone ranges.
for different tone ranges.
1
Select a source, then press
(EQ3)
repeatedly to select the EQ3 type.
2
Press
(SEL)
repeatedly until “LOW,”
“MID” or “HI” appears.
3
Press the volume +/– button
repeatedly to adjust the selected item.
repeatedly to adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold (SEL) before the setting is
complete.
curve.
To restore the factory-set equalizer curve,
press and hold (SEL) before the setting is
complete.
NEWS
(News),
AFFAIRS
(Current Affairs),
INFO
(Information),
SPORT
(Sports),
EDUCATE
(Education),
DRAMA
(Drama),
CULTURE
(Culture),
SCIENCE
(Science),
VARIED
(Varied),
POP M
(Popular Music),
ROCK M
(Rock Music),
EASY M
(Easy
Listening),
LIGHT M
(Light Classical),
CLASSICS
(Classical),
OTHER M
(Other
Music Type),
WEATHER
(Weather),
FINANCE
(Finance),
CHILDREN
(Children’s
Programmes),
SOCIAL A
(Social Affairs),
RELIGION
(Religion),
PHONE IN
(Phone In),
TRAVEL
(Travel),
LEISURE
(Leisure),
JAZZ
(Jazz Music),
COUNTRY
(Country Music),
NATION M
(National Music),
OLDIES
(Oldies
Music),
FOLK M
(Folk Music),
DOCUMENT
(Documentary)