Sony CDX-GT930UI User Manual
6
2
Getting Started
Playable discs on this unit
Resetting the unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel (page 6) and press the
RESET button (page 8) with a pointed object,
such as a ball-point pen.
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel (page 6) and press the
RESET button (page 8) with a pointed object,
such as a ball-point pen.
Note
Pressing the RESET button will erase the clock setting
and some stored contents.
Pressing the RESET button will erase the clock setting
and some stored contents.
Canceling the DEMO mode
You can cancel the demonstration display which
appears during turning off.
appears during turning off.
1
Press and hold the multi way encoder.
The setup display appears.
The setup display appears.
2
Rotate the multi way encoder until
“Demo” appears, then press it.
“Demo” appears, then press it.
3
Rotate the multi way encoder to select
“off.”
“off.”
4
Press and hold the multi way encoder.
The setup is complete and the display returns
to normal play/reception mode.
The setup is complete and the display returns
to normal play/reception mode.
Preparing the card remote
commander
commander
Remove the insulation film.
Tip
For how to replace the battery, see page 24.
For how to replace the battery, see page 24.
Setting the clock
The clock uses a 12-hour digital indication.
1
Press and hold the multi way encoder.
2
Rotate the multi way encoder until
“Clock Adjust” appears, then press it.
The clock adjustment display appears.
“Clock Adjust” appears, then press it.
The clock adjustment display appears.
3
Rotate the multi way encoder to set
the hour and minute.
To move the digital indication, push the multi
way encoder left/right.
the hour and minute.
To move the digital indication, push the multi
way encoder left/right.
4
After setting the minute, press the
multi way encoder.
The clock starts.
multi way encoder.
The clock starts.
Detaching the front panel
You can detach the front panel of this unit to
prevent theft.
prevent theft.
Caution alarm
If you turn the ignition switch to the OFF
position without detaching the front panel, the
caution alarm will sound for a few seconds.
The alarm will only sound if the built-in
amplifier is used.
position without detaching the front panel, the
caution alarm will sound for a few seconds.
The alarm will only sound if the built-in
amplifier is used.
1
Press (OFF).
The unit is turned off.
The unit is turned off.
2
Press .
The left side of front panel is released.
The left side of front panel is released.
Type of discs
Label on the disc
CD-DA
MP3
WMA
AAC