Sony CMT-SE1 User Manual
8
GB
You can preset up to 20 FM stations and 10 AM
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
Automatic tuning preset
You can automatically tune in all of the stations
that can be received in your area and then store
the radio frequency of the desired stations.
that can be received in your area and then store
the radio frequency of the desired stations.
1
Press TUNER/BAND repeatedly (or
move lever on the unit to FM or AM) to
select “FM” or “AM”.
move lever on the unit to FM or AM) to
select “FM” or “AM”.
2
Press TUNING MODE repeatedly until
“AUTO” appears in the display.
“AUTO” appears in the display.
3
Press TUNING +/–.
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
“TUNED” and “STEREO” (for stereo
program only) appear.
for a station. Scanning stops automatically
when a station is tuned in. At that time,
“TUNED” and “STEREO” (for stereo
program only) appear.
If “TUNED” does not appear and the
scanning does not stop
scanning does not stop
Set the frequency of the desired radio
station as described in steps 2 and 3 of
“Manual tuning preset” (page 8).
station as described in steps 2 and 3 of
“Manual tuning preset” (page 8).
4
Press TUNER MEMORY.
The preset number flashes. Perform steps 5
and 6 while the preset number flashes.
and 6 while the preset number flashes.
5
Press PRESET +/– repeatedly to select
the desired preset number.
the desired preset number.
6
Press ENTER.
7
Repeat steps 1 through 6 to preset
other stations.
other stations.
Tip
Press TUNING MODE to stop scanning.
Manual tuning preset
You can manually tune in and store the radio
frequency of the desired stations.
frequency of the desired stations.
1
Press TUNER/BAND repeatedly (or
move lever on the unit to FM or AM) to
select “FM” or “AM”.
move lever on the unit to FM or AM) to
select “FM” or “AM”.
2
Press TUNING MODE repeatedly until
both “AUTO” and “PRESET” disappear
from the display.
both “AUTO” and “PRESET” disappear
from the display.
3
Press TUNING +/– repeatedly to tune in
the desired station.
the desired station.
4
Press TUNER MEMORY.
5
Press PRESET +/– repeatedly to select
the desired preset number.
the desired preset number.
6
Press ENTER.
7
Repeat steps 1 through 6 to preset
other stations.
other stations.
Other operations
Tips
• The preset stations are retained for about half a day
even if you disconnect the mains lead or if a power
failure occurs.
failure occurs.
• To improve the reception, adjust the supplied
antennas or connect an external antenna.
Tuner
Presetting radio stations
Preset number
To
Do this
Tune in a station
with a weak signal
with a weak signal
Follow the procedure described
in “Manual tuning preset”
(page 8).
in “Manual tuning preset”
(page 8).
Set another station
to the existing
preset number
to the existing
preset number
After step 4, press PRESET +/–
repeatedly to select the preset
number you want to store the
station.
repeatedly to select the preset
number you want to store the
station.