Sony DAVLF1H User Manual
A
d
v
a
n
ced
Settin
g
s a
nd A
nd A
d
justm
e
nt
s
s
89
US
• If an error message appears, follow the message,
then select [YES].
An error message appears when:
An error message appears when:
– the calibration mic is not connected.
– front speakers are not correctly connected.
– surround speakers are not correctly
connected.
– front and surround speakers are not correctly
connected.
– subwoofer is not connected.
7
Press
C
/
X
/
x
/
c
to select [YES] or [NO],
then press
.
x
The measurement is OK.
Disconnect the calibration mic, then select
[YES]. The result is implemented.
[YES]. The result is implemented.
x
The measurement is not OK.
Follow the message, then select [YES] to
retry.
retry.
Tip
• You can check the distance between the listening
position and each speaker. See page 97.
Note
• While [AUTO CALIBRATION] works:
– do not turn off the power.
– do not press any button.
– do not change the volume.
– do not change the function.
– do not change the disc.
– do not insert or eject a disc.
– do not disconnect the calibration mic.
About error messages for the
auto calibration
auto calibration
If the following message appears during [AUTO
CALIBRATION], check “Symptoms and
remedies” and retry the auto calibration.
CALIBRATION], check “Symptoms and
remedies” and retry the auto calibration.
* If the sound of the surround speakers is not output,
adjust the wireless system. See “Adjusting the IR
transmitter and IR receiver of the surround speaker
(L)” (page 29).
transmitter and IR receiver of the surround speaker
(L)” (page 29).
FRONT L :
FRONT R :
CENTER :
SUBWOOFER :
SURROUND L :
SURROUND R :
If OK, unplug calibration mic and select
YES.
FRONT R :
CENTER :
SUBWOOFER :
SURROUND L :
SURROUND R :
If OK, unplug calibration mic and select
YES.
YES
16ft 4.8m 0.0dB
16ft 4.8m 0.0dB
16ft 4.8m + 1.0dB
16ft 4.8m + 4.0dB
10ft 3.0m - 2.0dB
10ft 3.0m - 2.0dB
16ft 4.8m 0.0dB
16ft 4.8m + 1.0dB
16ft 4.8m + 4.0dB
10ft 3.0m - 2.0dB
10ft 3.0m - 2.0dB
Measurement complete.
NO
Check speaker connection.
Retry?
Retry?
YES
Measurement failure.
NO
Error
message
message
Symptoms and remedies
Check
calibration mic
connection.
calibration mic
connection.
No channel sound can be detected.
Check that the calibration mic is
connected properly.
Check that the calibration mic is
connected properly.
If the calibration mic is connected
properly, the calibration mic or
calibration mic cord may be
damaged.
properly, the calibration mic or
calibration mic cord may be
damaged.
Mic input level
overloaded.
overloaded.
The calibration mic or system may
be damaged.
be damaged.
Contact your Sony dealer or local
authorized Sony service facility.
authorized Sony service facility.
Check front
speaker
connection.
speaker
connection.
Check surround
speaker
connection.*
speaker
connection.*
Only one surround speaker is
connected. Check that the surround
speakers are connected properly
(page 22).
connected. Check that the surround
speakers are connected properly
(page 22).
Check front and
surround
speaker
connection.
surround
speaker
connection.
Front speakers are not connected
and only one surround speaker is
connected. Check that the speakers
are connected properly (page 22).
and only one surround speaker is
connected. Check that the speakers
are connected properly (page 22).
Check
subwoofer
connection.
subwoofer
connection.
Front left and
right speakers
are reversed.
right speakers
are reversed.
Front speakers are not installed
properly or front left and right
speakers are reversed. Check the
front speakers are installed properly
(page 22).
properly or front left and right
speakers are reversed. Check the
front speakers are installed properly
(page 22).
If the calibration mic is left/right
reversed, place the calibration mic
properly.
reversed, place the calibration mic
properly.