Sony DCR-IP5E User Manual
129
Customizing Your Camcorder/
Bыполнeниe индивидyaльныx ycтaновок нa видeокaмepe
Icon/item
TITLEERASE
TITLE DSPL
TAPE TITLE
ERASE ALL
q
INFODSPL
q
REMAIN
CLOCK SET
LTR SIZE
DEMO MODE
Changing the menu settings
Notes on DEMO MODE
•You cannot select DEMO MODE when a cassette is inserted in your camcorder.
•DEMO MODE is set to STBY (Standby) as the default setting and the demonstration starts about 10
•You cannot select DEMO MODE when a cassette is inserted in your camcorder.
•DEMO MODE is set to STBY (Standby) as the default setting and the demonstration starts about 10
minutes after you have set the POWER switch to CAMERA without a cassette inserted.
To cancel the demonstration, insert a cassette, set the POWER switch to a position other than
CAMERA, or set DEMO MODE to OFF. To set to STBY (Standby) again, leave the DEMO MODE to
ON in the menu settings, set the POWER switch to OFF (CHG), and slide the POWER switch to
CAMERA.
To cancel the demonstration, insert a cassette, set the POWER switch to a position other than
CAMERA, or set DEMO MODE to OFF. To set to STBY (Standby) again, leave the DEMO MODE to
ON in the menu settings, set the POWER switch to OFF (CHG), and slide the POWER switch to
CAMERA.
POWER
switch
switch
CAMERA
VCR
VCR
VCR
CAMERA
VCR
VCR
CAMERA
VCR
VCR
CAMERA
VCR
VCR
CAMERA
VCR
VCR
CAMERA
MEMORY
MEMORY
CAMERA
MEMORY
VCR
VCR
CAMERA
Meaning
To erase a superimposed title (p. 114).
To display a superimposed title.
To not display the title.
To label a cassette (p. 121).
To erase all the data in the Micro Cassette Memory
(p. 123).
(p. 123).
To display the cassette information of the tape. This
is displayed for 5 seconds in the following cases: (p.
120).
• When turning on the power with a cassette
is displayed for 5 seconds in the following cases: (p.
120).
• When turning on the power with a cassette
inserted or inserting a cassette.
• When entering the VCR mode using the POWER
switch.
To not display the cassette information of the tape.
To display the remaining tape bar:
• for about 8 seconds after your camcorder is turned
• for about 8 seconds after your camcorder is turned
on or a cassette is inserted, and also calculate the
remaining amount of tape.
remaining amount of tape.
• for about 8 seconds after you select
and you
press the centre z on the control button or
DISPLAY is pressed to display the screen
indicators.
DISPLAY is pressed to display the screen
indicators.
• During fast-forwarding or rewinding the tape.
To always display the remaining tape indicator.
To set the date or time (p. 32).
To display the selected menu item in normal size.
To display the selected menu item at twice the
normal size.
normal size.
To make the demonstration appear.
To cancel the demonstration mode.
Mode
——
z
ON
OFF
——
——
z
ON
OFF
z
AUTO
ON
——
z
NORMAL
2
×
z
ON
OFF
(continued on the following page)