Sony DCR-IP5E User Manual
130
Icon/item
DATA CODE*
AREA SET
SUMMERTIME
BEEP
COMMANDER
DISPLAY
REC LAMP
Changing the menu settings
* Using the Remote Commander only
Note
If you press DISPLAY with “DISPLAY” set to “V-OUT/LCD” in the menu settings, the picture from
the TV or VCR will not appear on the screen even when your camcorder is connected to outputs on the
TV or VCR.
If you press DISPLAY with “DISPLAY” set to “V-OUT/LCD” in the menu settings, the picture from
the TV or VCR will not appear on the screen even when your camcorder is connected to outputs on the
TV or VCR.
Even if the power source is detached from the camcorder
The menu items settings will be retained even if you remove the power source.
The menu items settings will be retained even if you remove the power source.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the camcorder may
reflect on the subject if it is too close. In this case, we recommend you set REC LAMP to OFF.
When REC LAMP is set to ON, the red camera recording lamp on the front of the camcorder may
reflect on the subject if it is too close. In this case, we recommend you set REC LAMP to OFF.
POWER
switch
switch
MEMORY
VCR
VCR
CAMERA
MEMORY
MEMORY
CAMERA
MEMORY
MEMORY
CAMERA
MEMORY
VCR
MEMORY
VCR
CAMERA
MEMORY
VCR
MEMORY
VCR
CAMERA
MEMORY
VCR
MEMORY
VCR
CAMERA
MEMORY
MEMORY
Meaning
To display date, time and various settings during
playback.
playback.
To display date and time during playback.
To set your area temporarily, when using the
camcorder in a new location (p. 34).
camcorder in a new location (p. 34).
To be used when your area is not in daylight saving
time.
time.
To be used when your area is in daylight saving
time.
time.
To output a melody when you start/stop recording
or when an unusual condition occurs on your
camcorder.
or when an unusual condition occurs on your
camcorder.
To output a beep instead of the melody.
To cancel both the melody and beep sound.
To activate the Remote Commander supplied with
your camcorder.
your camcorder.
To deactivate the Remote Commander to avoid
remote control misoperation caused by remote
control of other VCRs.
remote control misoperation caused by remote
control of other VCRs.
To show the indicators on the LCD screen and
viewfinder.
viewfinder.
To show the indicators on the TV screen, LCD screen
and viewfinder.
and viewfinder.
To light up the camera recording lamp at the front of
your camcorder.
your camcorder.
To turn the camera recording lamp off so that the
subject is not aware of your recording.
subject is not aware of your recording.
Mode
z
DATE/CAM
DATE
——
z
OFF
ON
z
MELODY
NORMAL
OFF
z
ON
OFF
z
LCD
V-OUT/LCD
z
ON
OFF